Custom SeaDek flooring 226-344-5423 Get a quote
A 2014 Sea Ray 210 SLX on its lift, seen from above, with a bare white deck
A 2014 Sea Ray 210 SLX on its lift, seen from above, with a bare white deck

Sea Ray210 SLX2014

Two-colour foam, faux teak. Bow, cockpit floor, walkway and swim platform.

Bare deck

Get a quote

Send me the make, model, and year of your boat and get a quote for free.

The work

Five steps, all mine. Pick the colours, then I scan, design, build and install your kit.

SeaDek colour collection30 solid colours

Tap a colour to see its name.

Colours and pattern

You pick the colour, then the pattern.

Choose from 30 solid colours and four camo options. Pair your colours with teak lines, hex, or a pattern you bring me.

Outline illustration of the Sea Ray deck panels

Scan

I scan your boat where it sits, on the lift or on the trailer.

Every measurement comes off your own hull, so nothing is traced from a stock template.

Coloured Sea Ray panel design, with teak lines and the Sea Ray name on the swim platform

Design

I draw every panel around what is already on your deck.

The hatches, the drains, the seat pedestals, the transom steps. The kit comes apart where your deck does.

The matching Sea Ray kit after cutting, with the finished tan panels laid out together

Build

The drawing becomes your finished kit.

I cut each panel in my shop, with the pattern and lettering built into the foam.

A finished faux teak cockpit floor seen from the helm

Install

I fit every piece myself.

3M peel and stick, in the water the same day. Give the adhesive 24 hours.

Boats

Find one like yours.

Sea Ray 210 SLX, 2014 before the flooring installation
A 2014 Sea Ray 210 SLX on its lift with faux teak flooring

Sea Ray 210 SLX, 2014Two-colour PE/EVA foam, faux teak. Bow, cockpit, walkway, swim platform.

Sea-Doo 210 Challenger, 2010 before the flooring installation
A 2010 Sea-Doo 210 Challenger cockpit with dark grey and light grey plank pattern flooring, seen from the bow

Sea-Doo 210 Challenger, 2010Two-grey PE/EVA foam, plank pattern. Bow, cockpit floor and lounge.

Wellcraft Fisherman 222, 2020 before the flooring installation
A 2020 Wellcraft Fisherman 222 with grey two-tone teak pattern flooring, seen from the T-top

Wellcraft Fisherman 222, 2020Grey two-tone PE/EVA foam, teak pattern. Deck and cockpit.

Yamaha AR210, 2012 before the flooring installation
A 2012 Yamaha AR210 seen straight down from above, with tan hex and plank flooring in the cockpit and on the swim platform

Yamaha AR210, 2012Tan PE/EVA foam, hex and plank. Cockpit, bow and swim deck.

Nautic Star 2302 Legacy, 2021 before the flooring installation
A 2021 Nautic Star 2302 Legacy with tan teak pattern flooring in the bow and cockpit, seen from behind the console

Nautic Star 2302 Legacy, 2021Tan PE/EVA foam, teak pattern. Bow and cockpit.

Polar Kraft duck boat before the flooring installation
Polar Kraft duck boat with beige camo flooring in the shop

Polar Kraft duck boatBeige camo PE/EVA foam. Casting decks and floor.

These boats were done in PE/EVA foam. New work is SeaDek, supplied by Thomas Custom Marine.

Close detail of the grey deck grooves and fitted hatch edges on a completed Sea-Doo
Detail from a completed Sea-Doo installation. PE/EVA foam.

Material

New work is SeaDek, supplied by Thomas Custom Marine, Ontario's only SeaDek Certified Fabricator. I still scan, draw, cut and fit every kit myself.

Cross-section of two-colour SeaDek: a 3 mm camel top layer over a 3 mm espresso base, with the pattern routed through the top layer so the base colour shows 3 mm3 mm Routed line, shows the base colour
Two colours in one 6 mm sheet. Camel over Espresso shown.
  • 3 year warranty, honoured by SeaDek.
  • Winter installs in a heated space. No seasonal deadline.
  • Scanned at your boat, wherever it sits.

Pick your SeaDek

34 colour options

30 solid colours. Four camo options. Find your combination.

Colours can look different on screen. Confirm your choice with a physical sample.

Choose your texture

The finish you feel underfoot.

Close-up of SeaDek's fine brushed surface
Brushed
Close-up of SeaDek's embossed surface
Embossed
Close-up of SeaDek's Tetrapod surface
TetrapodStorm Gray and Black only.
Thickness
5, 6 or 8 mm. Two colours in one 6 mm sheet, or layers stacked for a third.
Pattern
Teak lines, hex, or a design of your own. Logos and lettering cut in or laser etched.
Budget
The PE/EVA foam on the boats above is still available, for less.

Your boat

Send me the make, model, and year of your boat and get a quote for free.

Your boat can be done within two days of the consultation.

Call or text 226-344-5423.

Preview only. Quote requests are not sent yet.

Choose a boat

Sea Ray 210 SLX, 2014 Sea-Doo 210 Challenger, 2010 Wellcraft Fisherman 222, 2020 Yamaha AR210, 2012 Nautic Star 2302 Legacy, 2021 Polar Kraft duck boat